Manufactured to the high standards of all other Aqua Safe systems using US made components & cartridges.
Optional Chloramines removal cartridge required for Sydney, Brisbane and Melbourne water supplies.
Genuine Dow Filmtec 200 litre per day TFC membrane producing on average 8 litres or more per hour on top of the 6, 8 or more litres in the storage tank, exceeding the requirement of even the biggest families.
A membrane flushing valve comes standard to maintain the efficiency of the unit and quality of the water produced. It also maintains Aqua Safe’s long standing 5 year expected membrane life and the optimum waste ratio.
Low waste ratio of 1:1 – 1:1.4 depending upon operating pressure. Higher recovery rates and lower waste ratios can be obtained but doing so will generally shorten the membrane life and result in lower water quality.
Filter cartridge housings are made in the USA. Manufactured from NSF certified materials or certified to the applicable NSF/ ANSI Standard 42, 51, 53, 58 or 61. (Contact Aqua Safe on sales@aquasafe.com.au or call 1300 661 735 for details on manufacturer & certification) , food grade materials that have been tested, certified and awarded the Australian Water Mark standard. These are 10″ Australian Standards AS3497 housings with a maximum operating pressure of 865 kPa.
A housing spanner is included for easy cartridge changes.
Only Genuine John Guest fittings and tube used (a key basis of our 10 year warranty)
Choice of sink mounted tap to suit every decor and taste.
Optional NSF certified materials or certified to the applicable NSF/ ANSI Standard 42, 51, 53, 58 or 61. (Contact Aqua Safe on sales@aquasafe.com.au or call 1300 661 735 for details on manufacturer & certification)  storage tank sizes to suit available cupboard space and family size.
Removes 96-98% of fluoride along with 99.99% of chloramines and chlorine.
Optional Alkaliser, Re-mineraliser or Pi filter.
The cartridges and membrane are NSF certified materials or certified to the applicable NSF/ ANSI Standard 42, 51, 53, 58 or 61. (Contact Aqua Safe on sales@aquasafe.com.au or call 1300 661 735 for details on manufacturer & certification)  to the applicable standard 42, 53 and 58.
Simple installation with the included ½” flick mixer braided hose connector or ¾” dishwasher tap adaptor.
Auto shut off valve; allows the system to automatically start replacing any water removed, shutting off the system again when the storage tank is full.
Filtermate 600kpa pressure limiting valve with dual check valves to comply with Australian plumbing codes.
Optional pressure gauge to indicate available water pressure (minimum of 280kPa required; 400kPa is optimal for reverse osmosis systems) or blockage of pre-filters. This is caused by sediment in the water resulting in drop in water pressure.
Stage 1:1 micron Carbon Filter
Stage 2:TFC RO Membrane
Stage 3:1 micron carbon Filter

Tap Selection

Click here to view our tap selection brochure.