This is a specialised fluoride reduction filtration system designed to remove over 90% of fluoride in your drinking water for a lot less than the cost of a reverse osmosis system. It provides clean fresh drinking water via its own dedicated tap. Conveniently position this unit under the sink and connect it directly to your mains water supply by choosing from the easy DIY connection available. The system comes standard with a round reach ceramic tap or choose from many other options to suit your décor.
Features
- Connects to mains water supply under the sink; either at a dishwasher, flick-mixer or copper pipe connection.
- 0.5 micron 3 stage filtration.
- DIY installation, no need for a plumber.
- Comes as a complete kit, no additional fittings required.
- Modern chrome tap comes standard with choice of other designs at no extra cost.
- 12 month cartridge life.
- NSF Cartridges exceeding Australian Standards.
- Pressure certified reducing/limiting valve.
Advantages
- US and Australian made components.
- Easy DIY installation with full instructions booklet and backup free call 1800 number.
- Choice of taps available.
- Genuine John Guest fittings and tube.
- Full comprehensive 10 year warranty.
- Every system is backed by an Australia wide service and distributor network or the unit can be returned to base for warranty or service work.
- Comes as a complete kit, no additional fittings required.
- Free annual cartridge change reminder service (optional).
Warranty
Full 10 year comprehensive warranty on all components excluding the cartridges which are considered consumables.
Specifications
Operation/Stages
3 stage filtration system connected directly to the water supply through a pressure limiting/anti-hammer valve with a sink mounted tap or faucet.
Micron Rating and Contaminant Removal
The output water is filtered to 0.5 microns reducing or removing fluoride, bacteria, chlorine, chloramines, THM’s heavy metals, pesticides, herbicides, insecticides, VOC’s, Giardia, Cryptosporidium, sediment, rust, suspended particles, taste, odour and other chemicals.
Flow Rate and Capacity
The AS280 system is designed for a flow rate of 2.3 litres per minute with a cartridge capacity of 4,000 litres.
Dimensions
The filter system dimensions are 400 mm wide x 125 mm deep x 340 mm high.
